270 WSM problems

pschultheis

Well-known member
Joined
Sep 24, 2002
Messages
623
Reaction score
0
I have always used Lee dies and purchases the RCBS die for my new 270WSM. After firing each peice of new brass they do not chamber well after their second resizing. Am I doing something wrong in the way that I set up this die? I have read the instructions and can not figure out what the problem is. Any help would be appeciated.

As always, thanks for the help.

Paul
 



intimidater37

Well-known member
Joined
Feb 23, 2004
Messages
218
Reaction score
0
take your seater die and turn it clock wise 1/8 turn at a time untill it bumps the shoulder back far enough to chamber in your gun
 

pschultheis

Well-known member
Joined
Sep 24, 2002
Messages
623
Reaction score
0
THanks Intimidator,

That worked, you sure have to get after them suckers as compared to non short cartridges. Smooth sailing now!
 

Rick

Well-known member
Joined
May 18, 2001
Messages
1,449
Reaction score
13
I had one for months that I could not get to shoot well and always chambered rounds with difficulty. Then I was told not to neck size them, but to full length size them all the time. That worked better. I was using the Lee collet dies to neck size them.
 


Top Bottom