Any pics of a P52 setup?

Tomo

Well-known member
Joined
Jan 2, 2004
Messages
111
Reaction score
0
The shutter housing sticks out farther on the P52. How have some of you rigged this in your setup?

You can see the differences in the pictures. P52 is the top one. P32 picture is courtesy of Pixcontroller.

Thanks,
Tomo
 

Attachments

DakotaMac

Suspended Account
Joined
Jan 9, 2004
Messages
14
Reaction score
0
I just finished my 4th cam with a p52 and by far the best method I have found is to use pipe insulation. Get the foam insulation that has a 1" hole on the inside. I should add that this also works very well around the shutter if you slice off about a 1/16 to 1/8" piece to use as a seal against flash bleed.

Mike
 

Tomo

Well-known member
Joined
Jan 2, 2004
Messages
111
Reaction score
0
Awesome, thanks MAC! What part of SD? I'm in the SE corner.

Tomo
 

DakotaMac

Suspended Account
Joined
Jan 9, 2004
Messages
14
Reaction score
0
I live in Huron. Some of my cams are around here but most are down by Running Water(Springfield) on my cousins land.

Mike
 
Top Bottom