DPDT or SPST or both?

Volhunter

Active member
Joined
Jul 12, 2001
Messages
26
Reaction score
0
First off, once again, I want to say thanks for all the help. I'm having to work on this thing a few minutes at a time, so its taking forever! I did get the soldering done on the Canon OWL PF. I couldn't have done it without yalls help! My question today is: On the bill of materials, it shows either 2 DPDT or 2 SPST. I bought 2 SPST switches. When I looked closer at one of the diagrams, it shows one of each. I just want a switch to control the LED test light and one to turn the system on and off minus the LED. What switch or combination do I use and how?
 

Richard Webb

Well-known member
Joined
Mar 11, 2001
Messages
461
Reaction score
0
I use one Radio Shack Center-Off Toggle Switch (275-620A).  They are pretty good about exchanging stuff if you would rather use one switch. I un-plug the 9 Volt Battery to turn off the PIR.
 

Volhunter

Active member
Joined
Jul 12, 2001
Messages
26
Reaction score
0
Forgive me again for being such a rookie. LOL How do I make the connections? What goes to what pin?
 

Advertisement



Top Bottom