Help With Brians Board

runnin3i

Member
Joined
Aug 2, 2002
Messages
17
Reaction score
0
I have gotten 2 of Brians Boards and I wired it the same way the pic on the web page says to for the D-370 but I left off the refresh and I am using a Cannon Owl Round Dial instead is the wiring the same or is there a different way to wire it ? I did it this way and nothing..I know I wired the camera right I tested it and it works great..Help !!!
 

ArkansasElkHunter

Well-known member
Joined
Jan 19, 2002
Messages
1,748
Reaction score
0
I assume you are using a 2 wire setup on the owl.  try swaping the wires to the opto.  polarity matters.
 

runnin3i

Member
Joined
Aug 2, 2002
Messages
17
Reaction score
0
Ok I'll give it a shot I'm assuming you mean swapping the shutter and common wires. Is that right?
 

Brian

Inactive
Joined
Jul 30, 2001
Messages
1,194
Reaction score
0
AEH is right you could have the wires crossed so swap them at the board to see if that is what the problem is.

Let me know if it worked so I can help you more.
 


Top Bottom