LCD on Cannon Owl PF

gtk

Well-known member
Joined
Mar 27, 2001
Messages
280
Reaction score
0
I check my cams this weekend.  I noticed on one cam, the lcd was blank, but the camera still worked/flashed.  I fired off a couple of pics for good measure, then replaced the batteries.  Still blank.  The weather has been a cold 20 degrees (ok, that's cold for MS).  I noticed another Cam of mine had a weak looking lcd.. The numbers where not clear.

Any suggestions ?
 

mkacala697

Well-known member
Joined
Aug 21, 2001
Messages
110
Reaction score
0
same thing happened to me at first but i couldnt figure out what it was and never asked so ive just been dealing with it

maybe someone will know what to do?
 

hamiltoe

Well-known member
Joined
Jul 8, 2001
Messages
174
Reaction score
0
I had the same problem on one of mine and found the LCD module was not making good connection to the board.  I must have jarred it loose when making the modification.  Try taking it apart again and applying pressure to it to see if it comes back on.
 

mkacala697

Well-known member
Joined
Aug 21, 2001
Messages
110
Reaction score
0
ham. u mean just push the little display unti down onto the board a little?

i will have to try this when i get my cam back from the woods
 


Top Bottom