New Pix to Shutter Assembly Question

theck

Well-known member
Joined
Dec 29, 2003
Messages
477
Reaction score
0
When I solder to the shutter assembly is this correct

red = shutter
green= power
black = common
yellow is not used

Thanks, Thomas
 

OhioBowHunter

Well-known member
Joined
Nov 9, 2002
Messages
2,515
Reaction score
0
shutter is yellow
green is refresh
power is red
common is black

If using a P32 with Elks Board the Refresh is not used
If using a P41 the common and Power are swapped
 

mohican

Well-known member
Joined
Jul 26, 2001
Messages
277
Reaction score
0
Where are you guys finding the wiring instructions for the new Universal boards. I received my two boards today but have no instructions using the ribbon cable on where they go. I looked at pixcontroller site but do not see them for the new universal board. Also, I purchased my ribbon cables from another site, which will not be named here, before Bills were available. I have wiring instructions for the older board but nothing on the new one and the phone jack. Please help cause I have two ready to go all I need to do is complete the wiring.

Thanks in advance.

Mohican
 

OhioBowHunter

Well-known member
Joined
Nov 9, 2002
Messages
2,515
Reaction score
0
On the Pix controoler site...

click on the Univ controller

go down to features and decide what jack you are using
example Phone jack and click on it... There it will explain how to wire to that jack and what connectors do what
 

theck

Well-known member
Joined
Dec 29, 2003
Messages
477
Reaction score
0
You saved me OBH. I was about to use the wrong wires. It seems to work except for the problem that I posted about in my other post. Thanks for all the help. Mohican, OBH has it right.
 

mohican

Well-known member
Joined
Jul 26, 2001
Messages
277
Reaction score
0
Man do I feel silly, I clicked on it earlier today but didn't scroll down to see the connections.
 

Latest Posts

Top Bottom