Outside mounting T-1 3/4 led

passgas55

Well-known member
Joined
Jul 25, 2001
Messages
270
Reaction score
0
If you buy the T-1 3/4 leds and need a way to mount them besides on a circuit board  use a 5/16" rubber grommet. All you have to do is drill a 5/16" hole,pop in a grommet and push a led in. Makes a snug weather proof fit.I always add a little silicon to the grommet and led to be safe.
 

ArkansasElkHunter

Well-known member
Joined
Jan 19, 2002
Messages
1,748
Reaction score
0
Digikey also has a little clear lens for $0.22 that pushes through the enclosure and the led snaps in the back.  The lens has fresnal rings that allow better side vision as well.
 


Top Bottom