Problem with OWL PF

rons

New member
Joined
Aug 17, 2004
Messages
4
Reaction score
0
I just soldered my third OWL PF and I have run into a problem. I made the bridge at 5 and 6. I connected one wire to #4 and one wire to the shutter circle. The problem is that as soon as I put the batteries in the LCD comes on, even if the camera slide is set to off. When I take turn the camera to off and remove the batteries, the camera stays on until I again switch it to on. Any ideas?
 

pocomoke

Well-known member
Joined
Jun 3, 2003
Messages
1,049
Reaction score
0
Thats not a problem,thats what it is supposed to do.Just do your test by having the cam on with batteries and touch the 2 wires together and sholud snap a pic even without film...
 

Latest Posts

Top Bottom