Securing Camera in Case

c3e001cc

Well-known member
Joined
Dec 6, 2003
Messages
116
Reaction score
0
For those of you who have difficulty securing the camera (ex:p-32) in the case I have found that by using some .040 Lexan and forming it in a "U" shape and gluing the "U" to the lid of the case it will hold the camera in place when the case is opened and closed. My latest setup is in a Pelican 1050 case with the P-32, a four AA cell battery holder and the FieldPix all mounted to the case lid. When the case is opened the Lexan is flexable enough to remove the camera. Some foam rubber is placed in the case behind the camera to hold the camera firmly against the lid. I will post a picture when I can get a good one.
 

c3e001cc

Well-known member
Joined
Dec 6, 2003
Messages
116
Reaction score
0
This is a picture of the Lexan formed to hold the camera. The short leg of the "U" is glued to the case lid.
 

Attachments

Latest Posts

Top Bottom