Thanks Tinhorn!

Possum

Well-known member
Joined
Jul 6, 2001
Messages
721
Reaction score
0
Thanks Tinhorn for the 6v lantern idea for the MS20
PIR.  I successfully modified both cams and now have a 100+ day cam.  I think I will go to 36 exp film now.  I figured the MS20 was drawing 16 milliamps when activated.  My electronic guru dad figured way over 100 days just like Tinhorn said.  We found my second MS20 cam drew 20 milliamps.  I concluded this was because I did not take out some of the parts that Tinhorn said to take out when using a 5v relay.  The drain is so minimal I decided to leave well enough alone.  Anyway, Thanks Tinhorn and have a HAPPY NEW YEAR EVERYONE!
 



GWHunter

Well-known member
Joined
Dec 11, 2001
Messages
77
Reaction score
0
Thanks to you Tinhorn I've completed my 2 stage tmr. and refresh crkt., works perfectly.

The problem I had with the refresh was that I had the res. values reversed.:rolleyes-green:

Now I'm running out of room in the elec. box. I was going to put it in a 9x7 first aid box but don't think there is room either. Guess I'll have to go to the ammo can after all.

Thanks Again Tinhorn I couldn't have done it without your patience.:toast-yellow:
 


Top Bottom