The camera is working tinhorn

markr

Active member
Joined
Dec 5, 2001
Messages
38
Reaction score
0
Now if i'm reading you right i should have 2 wires from the relay running to the plug? Is this right? If so the schematic only shows 1, as i did.  
 



davered1

Well-known member
Joined
Sep 1, 2001
Messages
1,793
Reaction score
0
markr

you need 2 wires running from relay to plug, 1 of the wires runs through the switch to change over from LED to PIR,but both need to go to plug and if you use your meter to check they will have continuity when the pir is tripped but no continuity when pir is not tripped.

This completes circuit through camera and allows cam to take pic.
 

Latest Posts



Top Bottom