unsoldering?

U

ukenout

Guest
Just wondering what was the best way to unsolder the original 24vdc blue relay on the Regent MS20C. I will be replacing it with a Radio shack relay. This is my first project so I was wanting to make sure I get it right. thanks
 

BlackWater

Well-known member
Joined
Mar 12, 2001
Messages
77
Reaction score
0
Buy a desoldering tool, or desoldering wick. Both will do a clean job removing the solder after you heat up.

Don't over heat board, do it in small amounts, and check you have not left pieces on board.
 

BUCKRIDER

Well-known member
Joined
Mar 11, 2001
Messages
82
Reaction score
0
yes, get the solder sucker tool, it is almost impossible to remove the relay without it. I did the first one without it and was lucky I did not tear the board up, the rest I have used the solder sucker, it is a breeze now!
 
Thread starter Similar threads Forum Replies Date
N Game Trail Cameras & Camcorders 1
Similar threads
Unsoldering the Bridges


Top Bottom